Anti Moisture Granules (Drying Agent) is a kind of advanced functional Masterbatch developed to solve moisture problem. It can absorb the moisture from plastic during molding process. Foam, gradation, crack, dot problems raised by moisture will be solved through add Anti Moisture Granules. It can keep product quality and yield to improve productivity and reduce cost.Meanwhile there is no bad effect to product physical mechanical quality. We are known as the biggest Anti Moisture Granules Suppliers In Kanpur, Uttar Pradesh, India
It is widely used for recycling material, damped plastic and degraded plastic of PP, PE, PVC and PS during molding process (film blowing, plastic blowing, plastic injection, plastic extrusion, salivation).
Application Examples:
Foam, Sheet, injection mouldings, profile extrusion and others.
·Absorb 20% equal to its own weight moisture.
·Easily use normal equipment, no change of process technique.
·No harm, no irritant, good plasticization property, granule form, equal in size and shade.Application Ratio and Method
How To Use?
Mix these series Desiccant Masterbatch with the stuff resin at ratio of 1:20 to 1:100,normally 1:50, no boasting material needed when moisture is below than 1%, (different ratio decided by the product moisture ratio), after simply stirring the mixture to homogeneous (no addictive agent needed), we can get the final products as we want.If moisture is higher than 1%, please dry material firstly to lower than 1%,then Anti Moisture Granules can be used.
